Filter
results
Relevance
- Relevance
- Price, low to high
- Price, high to low
Sort
Sort by:
- Relevance
- Price, low to high
- Price, high to low
-
Preston Fine Tooth Back Saw 8\" x 18pt
Steel backed saw which is sturdy and easy to use.Razor sharp fine teeth which have a ground finish.Special wavy set teeth to provide a clean and accurate cut.Ideal for cutting small wood sections, joints, dowels etc.Size: 8"/200mm x 18tpi blade.Pack Size: Single.- Dhs. 52.00 AED
- Dhs. 52.00 AED
- Unit price
- / per
-
J Marples Mortise Screwslide Marking Gauge - Rosewood
Made in Sheffield by Joseph Marples.Made from Rosewood with brass screw-slide and wear-plates.Hardened cutting points.Brass slides and fittings.Additional scribing point on the reverse.Pack Size: Single.- Dhs. 297.00 AED
- Dhs. 297.00 AED
- Unit price
- / per
-
J Marples Half Round Cutting Gauge
Made in Sheffield by Joseph Marples.Made from high quality beech.Hardened cutting blade.180mm capacity marking gauge with brass head.Pack Size: Single.- Dhs. 92.00 AED
- Dhs. 92.00 AED
- Unit price
- / per
-
OX Pro Sharpdraw Pencil Blades - Pack of 3
Snap off replaceable pencil blades for the Sharpdraw carpenters pencil.9mm Carbon-fibre blade always sharp for accurate marking.Snap off blade means sharpening is never needed.These blades will fit most 9mm snap off knives.Pack Size: Pack of 3.- Dhs. 37.00 AED
- Dhs. 37.00 AED
- Unit price
- / per
-
Marking Blue - 38g Tin
The well known marking blue for gauging, finishing and scaping operations.Size: 38g tin.Pack Size: Single.- Dhs. 50.00 AED
- Dhs. 50.00 AED
- Unit price
- / per
-
Self Adhesive Tape Measure - Left - 120cm
Self adhesive tape measure in metric.Graduations increase left to right.Yellow with clear black markings, an essential addition to homemade jigs and fixtures, to replace worn old scales or change to metric.Tough, flexible plastic scales.Size: 120 x 13mm.Pack Size: Single.- Dhs. 50.00 AED
- Dhs. 50.00 AED
- Unit price
- / per
-
Steel Straight Edge 24\"
Ground steel straight edge.Section size 32mm x 6.5mm.Accuracy of 0.001" tolerance.Size: 600mm/24".Pack Size: Single.- Dhs. 256.00 AED
- Dhs. 256.00 AED
- Unit price
- / per
-
Precision Stainless Steel Rule - 600mm/24\"
Made from fully heat treated stainless steel.Satin chrome non-glare finish with etched graduations.Metric graduations on one side and Imperial on the reverse.Size: 600mm/24".Pack Size: Single.- Dhs. 153.00 AED
- Dhs. 153.00 AED
- Unit price
- / per
-
Diatec Metric/Imperial Stainless Steel Rule 36\"/1000mm
Easy to read satin chrome finish.Made from stainless steel.Metric and Imperial graduations on one side and converson tables on the reverse.Size: 1000mm/36".Pack Size: Single.- Dhs. 81.00 AED
- Dhs. 81.00 AED
- Unit price
- / per
-
Diatec Metric/Imperial Stainless Steel Rule 6\"/150mm
Easy to read satin chrome finish.Made from stainless steel.Metric and Imperial graduations on one side and Imperial on the reverse.Size: 150mm/6".Pack Size: Single.- Dhs. 11.00 AED
- Dhs. 11.00 AED
- Unit price
- / per
-
Diatec Metric Stainless Steel Rule - 1000mm
Clear metric engraved graduations.Manufactured from stainless steel.Double sided with scale on all four edges.Size: 1000mm.Pack Size: Single.- Dhs. 76.00 AED
- Dhs. 76.00 AED
- Unit price
- / per
-
Aluminium Scale Rule - 300mm
Triangular aluminium scale rule printed with six different metric scales: 1:20, 1:25, 1:50, 1:75, 1:100 and 1:125.Size: 300mm.Pack Size: Single.- Dhs. 32.00 AED
- Dhs. 32.00 AED
- Unit price
- / per
-
Stanley Tylon Tape - 8m/26ft
Corrosion resistant, long life Tylon™ coated blade with positive blade lock for accurate measurements.Both Metric and Imperial graduations.Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction.Impact resistant ABS plastic case is fitted with an ergonomic over mould.Size: 8m/26'.Pack Size:...- Dhs. 92.00 AED
- Dhs. 92.00 AED
- Unit price
- / per
-
Stanley Tylon Tape - 3m/10ft
Corrosion resistant, long life Tylon™ coated blade with positive blade lock for accurate measurements.Both Metric and Imperial graduations.Tru-zero hook, that compensates accurately for internal and external measurements, with triple rivet construction.Impact resistant ABS plastic case is fitted with an ergonomic over mould.Size: 3m/10'Pack Size:...- Dhs. 32.00 AED
- Dhs. 32.00 AED
- Unit price
- / per
-
Stanley Powerlock Tape - 8m/26ft
Mylar coated steel blade with metric and imperial graduations which is 10 times more resistant to abrasion.Super-strong 3 rivet, automatically adjustable tru-zero end hook.High-impact, chrome plated ABS plastic case.Auto-locking mechanism and a conventional steel belt clip.Size: 8m/26'.Pack Size: Single.- Dhs. 135.00 AED
- Dhs. 135.00 AED
- Unit price
- / per
-
Diatec Universal Surface Gauge 300mm/12\"
Hardened steel base and scriber, 300mm/12" height.Fine pitch screw allows minute adjustments.Retractable gauge pins for linear work.Vee groove in base for use on round surfaces.Approximate base dimensions 3⅛" x 2½".Pack Size: Single.- Dhs. 259.00 AED
- Dhs. 259.00 AED
- Unit price
- / per
-
Diatec Pro Squares 6\"/150mm
Precision all metal squares.Ground on both edges of the blade and stock.Manufactured to workshop grade.Diatec Pro squares are made to B.S.939, grade B for squareness and straightness.Size: 150mm/6".Pack Size: Single.- Dhs. 99.00 AED
- Dhs. 99.00 AED
- Unit price
- / per
-
Diatec Screw Pitch Gauge
Covers both metric 60 degree and Whitworth 55 degree screw threads.52 blades, ranging from 4 to 62 tpi and 6 to 0.25mm.Pack Size: Single.- Dhs. 65.00 AED
- Dhs. 65.00 AED
- Unit price
- / per
-
Diatec Dial Gauge Metric - 10mm
Plunger type with lug back mounting.Revolution counter and tolerance pointers (measures in metric).58mm face diameter.Measures 0-10mm in 0.01mm increments.Pack Size: Single.- Dhs. 171.00 AED
- Dhs. 171.00 AED
- Unit price
- / per
-
Diatec Inside Micrometer 5-30mm
Suitable for measuring bores, slots and internal dimensions.Capacity: 5-30mm with 0.01mm graduations.Satin chrome plated finish with clear graduations.Supplied with setting ring gauge.Pack Size: Single.- Dhs. 360.00 AED
- Dhs. 360.00 AED
- Unit price
- / per
-
Diatec Outside Micrometer 25-50mm
Competitively priced precision micrometer.Enamelled frame with satin chrome thimble.Carbide tipped measuring faces reading to 0.01mm.Measuring capacity of 25 - 50mm.Pack Size: Single.- Dhs. 160.00 AED
- Dhs. 160.00 AED
- Unit price
- / per
-
Rubber Bands 1lb/450g - assorted pack
Popular pack of rubber bands in assorted widths and lengths.Pack Size: 450g.- Dhs. 50.00 AED
- Dhs. 50.00 AED
- Unit price
- / per
-
6 X 30mm Hardwood Precision Dowels 1Kg Pk (1800)
Precision sized fluted dowels for wood jointing.Size: 6 x 30mm.Pack Size: Pack of 1800.- Dhs. 112.00 AED
- Dhs. 112.00 AED
- Unit price
- / per
-
Staples for Gun T-50 8mm (5/16 inch) - Pack of 1250
Staples.Size: 8mm.Pack Size: Pack of 1250.- Dhs. 22.00 AED
- Dhs. 22.00 AED
- Unit price
- / per
-
High Tensile Bolts - 145 Piece
High tensile steel BZP hex-head bolts.Includes sizes: M5 x 12, M5 x 20, M6 x 30, M6 x 40, M6 x 50, M8 x 30, M8 x 50, M8 x 60, M10 x 30, M10 x 60 and M10 x 70mm.Handy storage case with...- Dhs. 124.00 AED
- Dhs. 124.00 AED
- Unit price
- / per
-
Aluminium Casement Latch
Satin finish.Supplied with fixings.Size: 150mm.Pack Size: Single.- Dhs. 22.00 AED
- Dhs. 22.00 AED
- Unit price
- / per
-
London Shelf Bracket White 200 x 150mm - Pack of 20
London pattern.White finish.Size: 200 x 150mm.Pack Size: Pack of 20.- Dhs. 99.00 AED
- Dhs. 99.00 AED
- Unit price
- / per
-
Piano Hinge 1830 x 25mm - Pack of 10
Electro brass plated.Size: 25 x 1830mm.Pack Size: Pack of 10.- Dhs. 344.00 AED
- Dhs. 344.00 AED
- Unit price
- / per
-
Studding 1 Metre Length M12 Diameter (Pack of 10)
Threaded Bar-Studding.Size: M12 x 1m.Pack Size: Pack of 10.- Dhs. 189.00 AED
- Dhs. 189.00 AED
- Unit price
- / per
-
Spring Washer M8 - pack of 100
Ring-shaped, split at one point and bent into a helix.Prevents loosening of the fastener by either movement or vibration.Bright zinc plated for increased corrosion resistance.Size: M8.Pack Size: Pack of 100.- Dhs. 21.00 AED
- Dhs. 21.00 AED
- Unit price
- / per
-
Spring Washer M5 - pack of 100
Ring-shaped, split at one point and bent into a helix.Prevents loosening of the fastener by either movement or vibration.Bright zinc plated for increased corrosion resistance.Size: M5.Pack Size: Pack of 100.- Dhs. 7.00 AED
- Dhs. 7.00 AED
- Unit price
- / per
-
Flat Penny Washer M10 x 25mm - pack of 10
Bright zinc plated for increased corrosion resistance.Size: M10 x 25mm.Pack Size: Pack of 10.- Dhs. 7.00 AED
- Dhs. 7.00 AED
- Unit price
- / per
-
Wing Nut M12 - pack of 10
Convenient alternative to the standard Hex Nut which allows for hand tightening.Bright zinc plated for increased corrosion resistance.Size: M12.Pack Size: Bag of 10.- Dhs. 15.00 AED
- Dhs. 15.00 AED
- Unit price
- / per
-
Wing Nut M10 - pack of 10
Convenient alternative to the standard Hex Nut which allows for hand tightening.Bright zinc plated for increased corrosion resistance.Size: M10.Pack Size: Bag of 10.- Dhs. 12.00 AED
- Dhs. 12.00 AED
- Unit price
- / per
-
Nut M5 - pack of 100
Bright zinc plated for increased corrosion resistance.Size: M5.Pack Size: Pack of 100.- Dhs. 9.00 AED
- Dhs. 9.00 AED
- Unit price
- / per
-
Nut with Nylon Insert M12 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M12.Pack Size: Pack of 100.- Dhs. 130.00 AED
- Dhs. 130.00 AED
- Unit price
- / per
-
Nut with Nylon Insert M5 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M5.Pack Size: Pack of 100.- Dhs. 18.00 AED
- Dhs. 18.00 AED
- Unit price
- / per
-
Nut with Nylon Insert M4 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M4.Pack Size: Pack of 100.- Dhs. 16.00 AED
- Dhs. 16.00 AED
- Unit price
- / per
-
High Tensile Set Screw M8 x 40mm - pack of 10
Zinc plated Set Screws are made from grade 8.8 steel and are for increased resistance to corrosion.1m fully threaded and conform to DIN 933 standards.Size: M8 x 40mm.Pack Size: Pack of 10.- Dhs. 16.00 AED
- Dhs. 16.00 AED
- Unit price
- / per
-
High Tensile Set Screw M6 x 40mm - pack of 10
Zinc plated Set Screws are made from grade 8.8 steel and are for increased resistance to corrosion.1m fully threaded and conform to DIN 933 standards.Size: M6 x 40mm.Pack Size: Pack of 10.- Dhs. 9.00 AED
- Dhs. 9.00 AED
- Unit price
- / per
-
Self-Tapping Screws - 8 x 5/8\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread in a pre-drilled pilot hole in sheet metal.Size: 8 x 5/8".Pack Size: Box of 200.- Dhs. 31.00 AED
- Dhs. 31.00 AED
- Unit price
- / per
-
Self-Tapping Screws - 6 x ½\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread in a pre-drilled pilot hole in sheet metal.Size: 6 x ½".Pack Size: Box of 200.- Dhs. 21.00 AED
- Dhs. 21.00 AED
- Unit price
- / per
-
Self-Tapping Screws - 4 x ½\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread in a pre-drilled pilot hole in sheet metal.Size: 4 x ½".Pack Size: Box of 200.- Dhs. 15.00 AED
- Dhs. 15.00 AED
- Unit price
- / per
-
Machine Screw Cross Recessed Pan Head - M6 x 30mm - Pack of 25
Designed for use with nuts or pre-tapped holes.Zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Threaded the entire length of its shank.Cross recessed drive.Size: M6 x 30mm.Pack Size: Pack of 25.- Dhs. 37.80 AED
- Dhs. 37.80 AED
- Unit price
- / per
-
Drywall Screws - 3.5mm x 50mm - Pack of 1000
25 degree "Super Sharp" point for ease of penetration, with coarse thread.Surface hardened up to 750 HV to prevent torque shearing.Made from C10-18 Steel.Size: 3.5 x 50mm.Pack Size: Pack of 1000.- Dhs. 108.00 AED
- Dhs. 108.00 AED
- Unit price
- / per
-
Drywall Screws - 3.5mm x 42mm - Pack of 1000
25 degree "Super Sharp" point for ease of penetration, with coarse thread.Surface hardened up to 750 HV to prevent torque shearing.Made from C10-18 Steel.Size: 3.5 x 42mm.Pack Size: Pack of 1000.- Dhs. 90.00 AED
- Dhs. 90.00 AED
- Unit price
- / per
-
Multi - Purpose Woodscrews 5.0 x 100mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size: 5.0 x 100mm.Pack Size: Box of 200.- Dhs. 85.00 AED
- Dhs. 85.00 AED
- Unit price
- / per
-
Multi - Purpose Woodscrews 5.0 x 80mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size: 5.0 x 80mm.Pack Size: Box of 200.- Dhs. 66.00 AED
- Dhs. 66.00 AED
- Unit price
- / per
-
Multi - Purpose Woodscrews 4.5 x 50mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size: 4.5 x 50mm.Pack Size: Box of 200.- Dhs. 36.00 AED
- Dhs. 36.00 AED
- Unit price
- / per
-
Multi - Purpose Woodscrews 4.5 x 35mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size: 4.5 x 35mm.Pack Size: Box of 200.- Dhs. 26.00 AED
- Dhs. 26.00 AED
- Unit price
- / per
There are 7654 Page(s) and article(s) for 'security*'
-
Preston Fine Tooth Back Saw 8\" x 18pt
Steel backed saw which is sturdy and easy to use.Razor sharp fine teeth which have a ground finish.Special wavy set teeth...View product -
J Marples Mortise Screwslide Marking Gauge - Rosewood
Made in Sheffield by Joseph Marples.Made from Rosewood with brass screw-slide and wear-plates.Hardened cutting points.Brass slides and fittings.Additional scribing point on...View product -
J Marples Half Round Cutting Gauge
Made in Sheffield by Joseph Marples.Made from high quality beech.Hardened cutting blade.180mm capacity marking gauge with brass head.Pack Size: Single.View product -
OX Pro Sharpdraw Pencil Blades - Pack of 3
Snap off replaceable pencil blades for the Sharpdraw carpenters pencil.9mm Carbon-fibre blade always sharp for accurate marking.Snap off blade means sharpening...View product -
Marking Blue - 38g Tin
The well known marking blue for gauging, finishing and scaping operations.Size: 38g tin.Pack Size: Single.View product -
Self Adhesive Tape Measure - Left - 120cm
Self adhesive tape measure in metric.Graduations increase left to right.Yellow with clear black markings, an essential addition to homemade jigs and...View product -
Steel Straight Edge 24\"
Ground steel straight edge.Section size 32mm x 6.5mm.Accuracy of 0.001" tolerance.Size: 600mm/24".Pack Size: Single.View product -
Precision Stainless Steel Rule - 600mm/24\"
Made from fully heat treated stainless steel.Satin chrome non-glare finish with etched graduations.Metric graduations on one side and Imperial on the...View product -
Diatec Metric/Imperial Stainless Steel Rule 36\"/1000mm
Easy to read satin chrome finish.Made from stainless steel.Metric and Imperial graduations on one side and converson tables on the reverse.Size:...View product -
Diatec Metric/Imperial Stainless Steel Rule 6\"/150mm
Easy to read satin chrome finish.Made from stainless steel.Metric and Imperial graduations on one side and Imperial on the reverse.Size: 150mm/6".Pack...View product -
Diatec Metric Stainless Steel Rule - 1000mm
Clear metric engraved graduations.Manufactured from stainless steel.Double sided with scale on all four edges.Size: 1000mm.Pack Size: Single.View product -
Aluminium Scale Rule - 300mm
Triangular aluminium scale rule printed with six different metric scales: 1:20, 1:25, 1:50, 1:75, 1:100 and 1:125.Size: 300mm.Pack Size: Single.View product -
Stanley Tylon Tape - 8m/26ft
Corrosion resistant, long life Tylon™ coated blade with positive blade lock for accurate measurements.Both Metric and Imperial graduations.Tru-zero hook, that compensates...View product -
Stanley Tylon Tape - 3m/10ft
Corrosion resistant, long life Tylon™ coated blade with positive blade lock for accurate measurements.Both Metric and Imperial graduations.Tru-zero hook, that compensates...View product -
Stanley Powerlock Tape - 8m/26ft
Mylar coated steel blade with metric and imperial graduations which is 10 times more resistant to abrasion.Super-strong 3 rivet, automatically adjustable...View product -
Diatec Universal Surface Gauge 300mm/12\"
Hardened steel base and scriber, 300mm/12" height.Fine pitch screw allows minute adjustments.Retractable gauge pins for linear work.Vee groove in base for...View product -
Diatec Pro Squares 6\"/150mm
Precision all metal squares.Ground on both edges of the blade and stock.Manufactured to workshop grade.Diatec Pro squares are made to B.S.939,...View product -
Diatec Screw Pitch Gauge
Covers both metric 60 degree and Whitworth 55 degree screw threads.52 blades, ranging from 4 to 62 tpi and 6 to...View product -
Diatec Dial Gauge Metric - 10mm
Plunger type with lug back mounting.Revolution counter and tolerance pointers (measures in metric).58mm face diameter.Measures 0-10mm in 0.01mm increments.Pack Size: Single.View product -
Diatec Inside Micrometer 5-30mm
Suitable for measuring bores, slots and internal dimensions.Capacity: 5-30mm with 0.01mm graduations.Satin chrome plated finish with clear graduations.Supplied with setting ring...View product -
Diatec Outside Micrometer 25-50mm
Competitively priced precision micrometer.Enamelled frame with satin chrome thimble.Carbide tipped measuring faces reading to 0.01mm.Measuring capacity of 25 - 50mm.Pack Size:...View product -
Rubber Bands 1lb/450g - assorted pack
Popular pack of rubber bands in assorted widths and lengths.Pack Size: 450g.View product -
6 X 30mm Hardwood Precision Dowels 1Kg Pk (1800)
Precision sized fluted dowels for wood jointing.Size: 6 x 30mm.Pack Size: Pack of 1800.View product -
Staples for Gun T-50 8mm (5/16 inch) - Pack of 1250
Staples.Size: 8mm.Pack Size: Pack of 1250.View product -
High Tensile Bolts - 145 Piece
High tensile steel BZP hex-head bolts.Includes sizes: M5 x 12, M5 x 20, M6 x 30, M6 x 40, M6 x...View product -
Aluminium Casement Latch
Satin finish.Supplied with fixings.Size: 150mm.Pack Size: Single.View product -
London Shelf Bracket White 200 x 150mm - Pack of 20
London pattern.White finish.Size: 200 x 150mm.Pack Size: Pack of 20.View product -
Piano Hinge 1830 x 25mm - Pack of 10
Electro brass plated.Size: 25 x 1830mm.Pack Size: Pack of 10.View product -
Studding 1 Metre Length M12 Diameter (Pack of 10)
Threaded Bar-Studding.Size: M12 x 1m.Pack Size: Pack of 10.View product -
Spring Washer M8 - pack of 100
Ring-shaped, split at one point and bent into a helix.Prevents loosening of the fastener by either movement or vibration.Bright zinc plated...View product -
Spring Washer M5 - pack of 100
Ring-shaped, split at one point and bent into a helix.Prevents loosening of the fastener by either movement or vibration.Bright zinc plated...View product -
Flat Penny Washer M10 x 25mm - pack of 10
Bright zinc plated for increased corrosion resistance.Size: M10 x 25mm.Pack Size: Pack of 10.View product -
Wing Nut M12 - pack of 10
Convenient alternative to the standard Hex Nut which allows for hand tightening.Bright zinc plated for increased corrosion resistance.Size: M12.Pack Size: Bag...View product -
Wing Nut M10 - pack of 10
Convenient alternative to the standard Hex Nut which allows for hand tightening.Bright zinc plated for increased corrosion resistance.Size: M10.Pack Size: Bag...View product -
Nut M5 - pack of 100
Bright zinc plated for increased corrosion resistance.Size: M5.Pack Size: Pack of 100.View product -
Nut with Nylon Insert M12 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M12.Pack Size: Pack of 100.View product -
Nut with Nylon Insert M5 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M5.Pack Size: Pack of 100.View product -
Nut with Nylon Insert M4 - pack of 100
Nyloc hexagon nut incorporates a nylon component to effectively lock the nut into position.Size: M4.Pack Size: Pack of 100.View product -
High Tensile Set Screw M8 x 40mm - pack of 10
Zinc plated Set Screws are made from grade 8.8 steel and are for increased resistance to corrosion.1m fully threaded and conform...View product -
High Tensile Set Screw M6 x 40mm - pack of 10
Zinc plated Set Screws are made from grade 8.8 steel and are for increased resistance to corrosion.1m fully threaded and conform...View product -
Self-Tapping Screws - 8 x 5/8\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread...View product -
Self-Tapping Screws - 6 x ½\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread...View product -
Self-Tapping Screws - 4 x ½\" - Box of 200
Pozidriv self-tapping screws are zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Screws tap their own thread...View product -
Machine Screw Cross Recessed Pan Head - M6 x 30mm - Pack of 25
Designed for use with nuts or pre-tapped holes.Zinc plated for increased corrosion resistance.Pan head with a flat under head surface.Threaded the...View product -
Drywall Screws - 3.5mm x 50mm - Pack of 1000
25 degree "Super Sharp" point for ease of penetration, with coarse thread.Surface hardened up to 750 HV to prevent torque shearing.Made...View product -
Drywall Screws - 3.5mm x 42mm - Pack of 1000
25 degree "Super Sharp" point for ease of penetration, with coarse thread.Surface hardened up to 750 HV to prevent torque shearing.Made...View product -
Multi - Purpose Woodscrews 5.0 x 100mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size:...View product -
Multi - Purpose Woodscrews 5.0 x 80mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size:...View product -
Multi - Purpose Woodscrews 4.5 x 50mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size:...View product -
Multi - Purpose Woodscrews 4.5 x 35mm (Pack of 200)
High quality multipurpose wood screws for industrial use, with pozi-drive head.Tried and tested to outperform other brands for durability and strength.Size:...View product
